Keurig Cup Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fasten this Keurig Cup dispenser underneath your top wall cabinet with double stick tape or screws.
- Rating
- 4.5 / 5
- Likes
- 56
- Downloads
- 307
- Makes
- 2
- Views
- 2,019
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Public Domain
If you use Keurig Cups, print this holder/dispenser to avoid fumbling for the immediate flavor that you desire. The dispenser features a last-in first-out storage. Or, cups may be removed from one side and inserted into the other side for rotating the “stock”.
Print without support. I used 0.25mm layer height, 2 vertical shells, 4 top shells, 4 bottom shells, and 20% honeycomb infill. The STL file includes corner adhesion pads that I needed for ABS material and may be useful for other materials (trim off after printing). You’ll need at least a 200mm bed size for the single loop and a 300mm bed size for the double loop.