Artemis Logo scultpure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here is a 3D sculpture of the NASA Artemis Logo.
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 92
- Makes
- 1
- Views
- 610
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
16 pieces to make the Artemis logo. Supports were needed when printing for the black and the blue base pieces. All other pieces were printed without supports. The base was tough to print because I printed it vertically with the letter pockets face up (to keep the letter pockets free from support material) You may have luck in other orientations. The letters may have to be glued into the base to stay. The main A logo, the red path, the moon, and the pins were all a press fit and did not need adhesive to stay together.
i included two different bases, the first a two piece version, and the second is a single piece version. The two piece version is shown in the photos.