52 models
Support Me Support my work by subscribing to my Printable club to have access to the multi-color version of the SLS Updates 17/02/2024 Stand redesigned with two versions, AMS/MMU and Multi parts. Description The " Space Launch System "…
A simplified model of SLS in preparation for the first crewed Artemis flight ( March Now April 1st 2026). I made this model so I could visualize/demonstrate the incredible feat of engineering that goes into getting humankind out into…
This is a model of the SLS rocket which will be used with the Artemis missions by NASA to bring people to the moon and to reach many new destinations. This model is based on the official NASA model found here:…
its model of MB SLS, i cut everything from my old project 3d model for video.
Full page at my website: https://www.daviddi-benedetto.com/sls-electric-violin This violin is designed for two purposes: As a Christmas gift for my younger brother, Daniel, who is an avid musician in my hometown’s high school orchestra.…
Updated models of a slightly larger size have been added for a tape width of 25 mm. An experimental mounting option between the two halves of the case is also being tested. BOM: 7x M3x10mm SHCS/BHCS 7x M3 Nuts Print Settings Rafts: No…
This is my model of the SLS Block 1B in 1/48 scale. Thus this ship is 2,3 meters tall. It is without the doubt a largest print I have ever done and I do recommend to use a glue here just to be sure. The assembly is rather simple so I…
This launch tower is my own original design meant to replicate the real SLS launch tower. This was designed to accept the Kmobrain SLS rocket model printed at 150% scale as a drop-in on the base. The segments are all designed to press…
After looking at hundreds of light sabers online and not getting exited to build any of them I decided to design my own, this is Project SLS. With over 140 parts this light saber has full internal detailing and is able to be easily…
Designed this model as a display stand for my magnetic SLS model. I was able to print all the components upright without supports on my Ender 3 (results may vary). Glue is necessary to connect all the pieces together, but the connectors…
The 3 included files take the place of the original model files SRB_Mid_L_White_x1 & SRB_Mid_R_White_x1. I split the middle part in half, so that the MMU print took a little less time. The srb_mid_l_r_white_x1_WormLogo.3mf file is the MMU…
This is one of the models that I designed and printed out on our SLS Machine for fun. It is not optimized for FDM. I might eventually do it in the future. It is 100 x 100 mm with interlinked single elements. I have attached some images of…
"The Space Launch System (SLS) is an American super heavy-lift expendable launch vehicle used by NASA. As the primary launch vehicle of the Artemis Moon landing program, SLS is designed to launch the crewed Orion spacecraft on a…
Mercedes AMG SLS Black Series, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle…
A tool for completely blocking the Floyd Rose 1500 bridge of my Schecter C-1 FR SLS Elite electric guitar from moving both forward and backward, effectively hard-tailing it. Included also is a 3mm hole to assist in pulling the blocker out…
Experience the dramatic allure of automotive design with this 3D printable STL model of the Mercedes-Benz SLS AMG. This iconic gullwing sports car model is perfect for automotive enthusiasts looking to display the unforgettable styling…
Model of NASA Space Launch System (SLS) rocket for the classroom
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is the official logo of the NASA Artemis Program, designed to be the perfect display companion for your 3D printed SLS Rocket. I printed the amazing Artemis Rocket (the one by BrainyRP) and designed this logo to complete the display…
I use PLA, nozzle 0.4, layerhight 0.3. No support needed. But i guess anything goes :) You need one box and make a square 100*100mm opening in the bottom, mount the sliders parrallell to the opening. I used blind rivet to fasten the…
The Space Launch System (SLS) is an American Space Shuttle-derived heavy expendable launch vehicle. It is part of NASA's deep space exploration plans including a manned mission to Mars. -Wikipedia This is a 1/100 model of the SLS Block I…
This unique pen consists of 1 single piece taking advantage of all AM possibilities, it is not a print in place assembly of parts, yet it is fully functional with multiple springs , click and release mechanism. It can Only be made by AM…
I suggest PETG or something else but PLA, I think my PLA will melt under that heat from the GPU. Scale it for your GPU height in your case. Included a full model in one piece or two models that can be joined together using a bit of glue.…
Designed with the intention of being printed in steel, all initial tests were done in PETG. The primary reason is to use the CHT bimetal hardened steel nozzles from Juupine, that go into their Bambu Labs Clone. The thermistor and heater…
All original design credit belongs to the creator — this is a personal modification and sharing only. (dmrn210) This is my personal modification of the original SLS10 slingshot: I extended the fork tips and added pass-through holes,…
I wanted to print this 1:100 to match the rest of my collection but one part(cs_lh2tank) was too big for my printers, even the ones with 300mm Z, so I cut it in half. This is scaled 200% compared to the original model.
I did not find the right sized screw but I have the opportunity to use a SLS printer so I quickly made a print-in-place hinge to connect the lever to the top of the Speedloader case. Maybe someone is happy to use that as well. After a…
Customized version of http://www.thingiverse.com/thing:348618 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=348618 Instructions Using the following options: hard_case = 0 thick_edge = 0 hole_distance =…
This is a different name plate for the SLS model with the Artemis mission logo on it. It is for a 1:110 scale model. I printed face down using an AMS. I included the Fusion360 model if you wanted to make any changes.
This is a direct replacement for MB part number A1299971681: "Grommet under oil reservoir", found on W124 estate/wagon models with SLS rear suspension. It mounts the SLS oil reservoir to the chassis. The primary STL has a tighter fit than…
This is a flexi model of the Artemis II made with Flexi Toy Maker. Can use with AMS or Non-AMS. Please like and leave a make! Happy printing! Powered by MakerWorld-Flexi Toy Maker ( https://makerworld.com/makerlab/flexiToyMaker )
Mercedes SLS AMG Keychain This keychain is inspired by the iconic Mercedes SLS AMG , known for its breathtaking performance and signature gull-wing doors. Print with a 0.2 mm nozzle for finer detail. Perfect for Mercedes-Benz fans ,…
Mercedes SLS AMG C197 Racing widebody
SLS Rocket shaped keychain in the maximum cargo configuration. Can be printed with 3 different colors by level to get a true look. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .4mm x .15mm…
SpaceX Starship (with Super Heavy booster)&SLS Block2 Cargo
In order to transfer SLS powder from a Formlabs Fuse 1/1+ into a sealed storage box I made this funnel. The funnel locks into the opening of the storage container. It allows to insert the powder cartridge on top in the same way that you…
Я решил принять участие в школьном конкурсе, посвященном космосу. Вдохновленный ракетой NASA SLS, я создал и напечатал свою модель ракеты. На это у меня ушло три дня. Это моя первая самостоятельная работа, и я хочу поделиться ею с вами.
SLSBPP - 30.5mm Round Scientific Sample Box - 1x1 Piece (Scientific Lab Sample Box PuzzlePieces) This is for a round, 30.5mm diameter Sample box. More will follow soon :)…
I recently rebuilt my 10" rack and had the idea to have a physical indicator for the drive usage stats of my NAS drives, since I have a bunch of Solum ESLs that are otherwise unused currently. This was my initial answer to how to actually…
I am crazzy about protecting my equipment. This is a camera protector for the industrial camera that comes with our scanners. Category: 3D Printing
the OpenScan Benchy 3D Scanner comparison, see https://github.com/OpenScanEu/OpenScanBenchy/ We publish all the original files (send by the participants) as well as the aligned version shown in the final rendering. Feel free to reach out…
Sperrschlüssel Schlüssel Schraubendreher EVU für SHU SLS oder Sperrkappe Mit dem Sperrschlüssel Schraubendreher für EVU kann die Sperrfunktion am SHU oder SLS bedient werden und ein- wie ausgeschaltet werden. Ebenfalls kann der Schlüssel…
This jig is made to drill 6mm or 3mm holes 19mm from the inner edge. this makes it ideal for 38mm high SLS beams. Even if the beams are slightly smaller as long as you reference the same planes that need to line-up the dawels will match.…
Experience the dramatic allure of automotive design with this 3D printable STL model of the Mercedes-Benz SLS AMG. This iconic gullwing sports car model is perfect for automotive enthusiasts looking to display the unforgettable styling…
A simplified model of SLS in preparation for the first crewed Artemis flight ( March Now April 1st 2026). I made this model so I could visualize/demonstrate the incredible feat of engineering that goes into getting humankind out into…
Designed this model as a display stand for my magnetic SLS model. I was able to print all the components upright without supports on my Ender 3 (results may vary). Glue is necessary to connect all the pieces together, but the connectors…
A 3D-printable model of the Space Launch System or SLS rocket being developed by nasa the model is full scale meaning it is about 98 meters tall but it is designed to be scaled down between 1/100 and 1/1000 scale and printed on a regular…
My version of a calibration cube. Added some shapes and a text to get more detailed information about the printer calibration. Example Filament: Fillamentum Nylon CF15 Carbon Black
Information list of multicolor files Solid Rocket Booster SRB_Left SRB_Left_Hat SRB_Right_Bot SRB_Right_Top SRB_Engine_x2 Tank CoreStage_Bot CoreStage_Top Engine_Section Stand Nameplate In addition to the Multicolor files, you need to…
