Walkingpad Remote Desk Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Desk Mount for the Walkingpad A1 Pro Remote to screw on. The Remote sits in the mount press-fitted
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 85
- Makes
- 0
- Views
- 813
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
I designed this holder for the Remote of a Walkingpad A1 Pro. Other Walkingpads have the same remote apparently.
The remote sits snug press-fitted in the holder tight enough, so that it doesn't fall out and withstands button presses.
The holder can be screwed with two screws to the desk. The mount surface should be big enough so that it can also be fixed with adhesive tape.
The angle of the mount is 120° so that it matches my standing desk's control panel from Flexispot.
Print face down with at min. 3 wall layers. Infill should be irrelevant.
I printed mine in ABS. If the fit is too tight on your printer, you may decrease horizontal expansion or scale the whole model.