FLSUN Optical Limit Flag (taller)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I loved MatGyver85's optical limit switches, but had trouble getting one of mine to trigger, so I remixed his flags to…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 161
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I loved MatGyver85's optical limit switches, but had trouble getting one of mine to trigger, so I remixed his flags to be one mm taller, so will trigger one mm sooner and you'll lose 1mm of print height.
These endstops worked great, but I had to add a few inches to two of the cables and had to swap the two outside wires (red & white) to work with my board: MakerHawk 6pcs Optical Endstop with 1M Cable
Update 9/4/2021: Added a + version (1.5mm longer) and - version (.5mm longer), should you want to play.
Print Settings
Printer:
FLSUN QQ-S Pro
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament:
eSun PLA+
Purple
Notes:
No supports need due to only 1mm of overhang, if printed in the default position.
Category: 3D Printer Parts