F1 modular wing - 2018
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.40 – €0.49 net (excluding VAT)
For file: allettone-modulo-1_01mm_pet_mk3.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.45 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 34.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is the 2018 front wing upgrade for the F1-09 R/C car by 3racing.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 58
- Makes
- 0
- Views
- 1,143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
This is the 2018 front wing upgrade for the F1-09 R/C car by 3racing.
It is made by 4 parts, to make simple the replacement in case of accident.
The design as been made to increase the downforce and reduce the weight. In the nose, there is the S-duct, to duble the surfaces and produce more downforce.
This wing is the update of the older F1 2017 wing on my library.
For more information visit my website: http://www.federicoredaelli.it/
Print instructions
You need to print with support material except from the "Alettone modulo 1" STL file (the centre part)
To assemble it you need one M3 screw and bolt, and some glue to assemble the centre part with the flaps.
For more information visit my website: https://www.federicoredaelli.it/