Simple Door Lock
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.51 – €1.84 net (excluding VAT)
For file: Lock&Body_0.2mm_PLA_MK3S_1h49m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.68 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 1.82 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simplified version of the Door lock without writings and more printing-friendly.
- Rating
- 4.714 / 5
- Likes
- 163
- Downloads
- 1,030
- Makes
- 14
- Views
- 3,919
- Reviews
- 14
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
The previous design had some flaws which didn't allow the lock to print sideways without supports, and some other unnecesary graphic stuff. I simplified all of it for a more useful design which can also be used in my ikea closet.
I also changed the screw by a hole where you can just screw a simple M4 screw and add whatever handle you want, if you wish, to that m4 screw.