Airtag Keychain with Magnets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Airtag keychain with magnets
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 56
- Makes
- 0
- Views
- 773
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Airtag Keychain with 3x3 round magnets, and optional rear case with 6x3 embedded magnets to attach to metal etc.
Required items:
3x3mm round magnets - 6, 9 if you're printing the optional rear case.
Optional - 6x3mm round magnets - 3 for Airtag Magnet Rear for keychain.
Instructions:
- Print Airtag_Keychain_Magnets.stl. No supports required. Clearances are made for TPU, not tested for PLA/PETG. Infill minimum 5%, perimeters 3.
- Optionally print Airtag Magnet Rear for keychain. Pause print at 4.20mm height, insert 6x3mm - 3 pieces. Ensure that the polarity is the same for all 3.
- Insert 3x3mm magnets to Airtag_Keychain_Magnets.stl, making sure that the polarity is opposite for the two pieces to join together.
- If you printed the optional rear case, insert 3x3mm magnets there too.
Depending on your printer, the 3x3mm magnets should be a push fit. If it is a little loose, just add a tiny dab of superglue to hold it in place.
Included Airtag Magnet Rear for keychain.3mf files with pause print at 4.20mm height & STL if you want to adjust the settings yourself.
Any feedback is appreciated.