Airtag Keychain with Magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Airtag keychain with magnets
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 773
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Airtag Keychain with 3x3 round magnets, and optional rear case with 6x3 embedded magnets to attach to metal etc.
Required items:
3x3mm round magnets - 6, 9 if you're printing the optional rear case.
Optional - 6x3mm round magnets - 3 for Airtag Magnet Rear for keychain.
Instructions:
- Print Airtag_Keychain_Magnets.stl. No supports required. Clearances are made for TPU, not tested for PLA/PETG. Infill minimum 5%, perimeters 3.
- Optionally print Airtag Magnet Rear for keychain. Pause print at 4.20mm height, insert 6x3mm - 3 pieces. Ensure that the polarity is the same for all 3.
- Insert 3x3mm magnets to Airtag_Keychain_Magnets.stl, making sure that the polarity is opposite for the two pieces to join together.
- If you printed the optional rear case, insert 3x3mm magnets there too.
Depending on your printer, the 3x3mm magnets should be a push fit. If it is a little loose, just add a tiny dab of superglue to hold it in place.
Included Airtag Magnet Rear for keychain.3mf files with pause print at 4.20mm height & STL if you want to adjust the settings yourself.
Any feedback is appreciated.