Mechanical carousel with horses
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.58 – €0.71 net (excluding VAT)
For file: Gear _0.4n_0.25mm_PLA_MK3S_36m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.64 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 36 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Mechanical carousel with horses ,for horse lovers or for your children
- Rating
- 4.714 / 5
- Likes
- 357
- Downloads
- 607
- Makes
- 7
- Views
- 5,307
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Attention Upgrade !! - improvement to the motor version
You only need to print two parts, buy the N20 Mini Metal Gear Motor and a box for two 18650 batteries. I will add a link to buy.
The motor is suitable with a speed of 30-50/min. I bought more motors for another model, but they helped me here
The height of the motor body with gears should be 25 mm without the shaft
N20 Mini Metal Gear Motor :
https://www.aliexpress.com/item/1005005699205905.html?
Battery 18650 box :
https://www.aliexpress.com/item/1005003772436297.html?
Just add these parts :
Put the new part under the carousel, insert the motor connected to the cables and add the gears
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
As already mentioned in the competition entry, I created a mechanical model and tried to make the aesthetic side stand out as well. I hope you will like the carousel model. You can move the model in different ways - spin from the side by the gears or from above through the top. More experienced modelers can bring this model to life with motorized movement .
Horses move in 3 directions - back and forward, around their axis and up and down.
Update!!
Added stl files of all parts of the model, I hope everything will be fine, if not write, I will fix it
Tvrdé: Použil som 9 kusov ložiska 608zz- / 8x22x7mm / ložisko vyrobené z inline lúča a 1 kus 6903zz / 17x30x7mm /
Use 6 pieces 608 bearings for a large rotating plate under horses, press them properly and use 3 pieces 608 bearings in the outer gears where the golden horses are. Bearing 6903- /17x30x7mm/ use it in the hole in the base - the big gray part, it helps turn the big golden circle.
I recommend smoothing out the waves on the base a little so that the horses move better.
The parts fit together just right, maybe you need to push the bearings into the moving plate a little.
The axles under the horses may need to be sanded a little so that they move freely in the holes in the toothed axles. If there is a problem, write to me, I will be happy to help
Added part: a turning stick, you can insert it instead of a horse
In case of problems when slicing 3mf files - if holes are missing in the parts, I recommend using the Prusaslicer
Filaments used: Prusament PLA Viva La Bronze
Prusament PLA Galaxy Silver
You can find another carousel model here:
https://www.printables.com/cs/model/275718-wheel-carousel-with-hearts
https://www.printables.com/cs/model/295206-carousel-with-butterflies-and-caterpillars
I wish you a lot of fun!