Nikula Monocular Polycarbonate Protector & killflash
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made for my cheap aliexpress "nikula" monocular. I needed a piece that will hold down a polycarbonate sheet, so I…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 27
- Makes
- 0
- Views
- 477
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Made for my cheap aliexpress "nikula" monocular.
I needed a piece that will hold down a polycarbonate sheet, so I could safely use it in Airsoft. I also went ahead and added a killflash. (because why not!)
It's designed to be glued to the front of the monocular. I used a glue commonly used in smartphone repair (B-7000). I would avoid putting superglue (CA) near anything with a lens.
You most likely can also print it without the killflash.
To make the killflash pattern, align the two parts and modify the -killflash.stl one to have zero top/bottom layers, and a honeycomb infill with the desired percentage.
Category: Sport & Outdoors