Nikula Monocular Polycarbonate Protector & killflash
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made for my cheap aliexpress "nikula" monocular. I needed a piece that will hold down a polycarbonate sheet, so I…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 477
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Made for my cheap aliexpress "nikula" monocular.
I needed a piece that will hold down a polycarbonate sheet, so I could safely use it in Airsoft. I also went ahead and added a killflash. (because why not!)
It's designed to be glued to the front of the monocular. I used a glue commonly used in smartphone repair (B-7000). I would avoid putting superglue (CA) near anything with a lens.
You most likely can also print it without the killflash.
To make the killflash pattern, align the two parts and modify the -killflash.stl one to have zero top/bottom layers, and a honeycomb infill with the desired percentage.
Category: Sport & Outdoors