Liczymy pasujące modele…
Printing instructions .4mm nozzle layer height 0.2mm Walls 4, 0 TOP and 0 BOTTOM Layers. Infill honeycomb and percentage of 18-28 higher infil gives better effect but darker image through lens. Can be lightly painted. Fit should be snug…
This is a 2 part model that is easy to print and assemble. The killflash itself is designed by another and then I customized it for this application. I customized it with 0.25mm walls and it is meant to be printed with a 0.2-0.25mm…
I was not satisfied with the already available lens-protectors so I made another one. This one is very slim and does not influence the general look of the sight too much. Meant for the cheap EOTech clones from China (e.g. for Airsoft). I…
OpenSCAD code for a cylindrical scope killflash. Use https://openscad.cloud/openscad/ to modify and generate an STL. Use the SCAD file to customize for your device and printer.
I was not satisfied with the already available lens-protectors so I made another one. This one is very slim and does not influence the general look of the sight too much. Meant for the cheap EOTech clones from China (e.g. for Airsoft). I…
Because my Picatinny rail was too short and the standard off-the-shelf Lens-Protectors did not fit, I designed this shorter version. (mounted on a Tavor T21) The lens is taken over from the normal lens protectors that can bought e.g. on…
Killflash meant to press fit onto the front of your romeo5. This doubles as a sacrificial lense cover for airsoft. I couldn't find a model anywhere so I decided to make one. Enjoy Also will work for Aimpoint CompM5s optics also
Someone asked if it was possible to design and print a killflash for an EOTech so I gave it a shot. There's probably other existing models out there already but it was a fun little project. It works better than I expected and would…
There are two groups of files for this. One is just the front and rear caps. The other is the front cap with a kill flash. Shockcord Cap with Killflash: I have ‘remixed’ and added to this kit by creating an optional front killflash/anti…
Sig Sauer Zulu 5 (10x42mm) Binocular: Anti Reflection Device (ARD) aka Killflash, Binocular Cap and Shock Collar System
This is a press fit anti reflection device (ARD) or killflash for scopes with a 34mm main tube. There are 2 models available, one with a full hex grid that will provide a wider angle of reduced reflection and one with a center cutout of…
Killflash for Sig Romeo5 GenII red dot optic Wanted a killflash to sit inside the optics rather than outside so here it is.
Because my Picatinny rail was too short and the standard off-the-shelf Lens-Protectors did not fit, I designed this shorter version. (mounted on a Tavor T21) The lens is taken over from the normal lens protectors that can bought e.g. on…
Killflash for the fossdot, replaces 1 part the lens holder with 2 a modified lens holder and a press fit killflash. Project file shows how to do object modifier, object modifier has 0 walls, 0 top and bottom layers. Honeycomb infil with…
Fit is super snug, it is chamfered on the inside to allow for easier install. Grid is 0.8mm thick, which should allow 2 layer lines with a 0.4 nozzle. With a smaller grid thickness, I was having issues with the corners not properly…
KILLFLASH - ACOG Killflash pro optiku. Vnější pr. 38 / Šestihran 5mm Pro vyčištění šestihranů lze použít IMBUS 5.
HIKMICRO TQ35 2.0 Honeycomb 6mm or 5mm killflash no need to put down lens cover used screw M3x40 + nut Print settings: 0,2 mm layer 8 walls no supports
killflash 28mm used M3X14 screw and M3 nut printing settings 0,2mm layer 4 walls no supports
Another designer made this kill flash for our Airsoft optic, the Vortex Razor AMG UH-1. However, when I tried printing theirs, my Bambu Labs printer had issues printing the honeycomb style. The slicer would not recognize the honeycombs…
Used pla and petg. Petg to protect your scope and to stop light
A simple killflash designed to fit the UH-1 red dot Gen 1 and Gen 2 Can withstand a couple 300-350 fps shots from point blank range, to be used in CQB enviroments. PLA+ is recommended CF materials can be used for increased strenght 4…
My existing killflash from novritsch got shot out, and I still wanted to use the killflash body, so I just made some new honeycombs for the killflash body so we can re-use it endlessly. The killflash was made with slightly thicker combs…
These camera's are made pretty robust, and I've gotten lucky that mine hasn't been shot out over the years of playing Airsoft. I play as a Sniper, and I've had my scope cams glare give me away at times. Figured this was a great way to…
Version 2 (more like 5.2) now with thinner grid at 0.4mm thickness! Including the Fusion 360 file! Whether in airsoft or out in the woods, shiny stuff is really easy to spot. The front of your flashlight is a large perfectly reflective…
Rear sun cover and front protection for EOTech holographic sight replicas. Tested on Theta Optics 552, OHHLION 551, and Eotech 552 licensed. Used petg and pla.
These camera's are made pretty robust, and I've gotten lucky that mine hasn't been shot out over the years of playing Airsoft. I play as a Sniper, and I've had my scope cams glare give me away at times. Figured this was a great way to…
Just friction fits on, if it is too tight hit it with a heat gun and slide on. Includes F3D file of the hex pattern for making different ARDs. Make sure your XY scaling is accurate. Fuzzy skin recommended for outside only.
Prini infill 20% gyroid Layer 0.16/0.2 mm Work for scope up to 50mm wide Mount on the front of the optics
Because there is no Killflash on the Market for the MB4412D Sniper Rifle Scope, i designed a killflash on my own. This killflash is maybe not as good as it could be so you are invited to improve it! This basic sample was good enough for…
This is a killflash and cap for the TE211M, secured with shock cord, based on One Hundred Concept's ScopeCap/LightCap/ShockCollar. The rear cap and collar for the…
This is designed specifically for the Primary Arms 1-6x LPVO scope. It fits snugly between the front objective and the factory lens cover. Simply remove the cover assemble, jam this in, and replace the lens cover. This is friction fit so…
Made for my cheap aliexpress "nikula" monocular. I needed a piece that will hold down a polycarbonate sheet, so I could safely use it in Airsoft. I also went ahead and added a killflash. (because why not!) It's designed to be glued to the…
Designed for Vector Optics Maverick GenII (SCRD-12II). v4 front: This new variant has the polycarbonate piece at a slight angle to avoid reflections from the emitter, especially indoors with high illumination levels. Either a friction…
Scope can throw flashes, but if you put killflash on it, it will works and looks pretty good. Let me know how does it work .
I wanted a sun shade and killflash for my Eotech Holosights that was robust and could take a literal beating as well as stand up to heat concerns. Print with hex down, use tree supports. I recommend PC, Nylon, or HTPLA. Don't cheap out,…
This was Designed and Printed for my Colleague. Its a Killflash insert for the Scope Cap thats just a push in fit. Designed in Tinkercad, Open on Tinkercad License: CC BY-NC-SA 3.0
I designed this for the basic Novritsch Rifle Scope. It was a press fit into my scope but it wouldnt hurt to add a little bit of hot glue to hold it in place. Printed on an Ender 3 Max 0.12mm layer height Polymaker PLA pro
This is not a fucntional flashkill, it's mean for use in airsoft to protect scopes with an outer diameter of 30mm.
Honeycomb Killflash for 21 mm scopes/thermal cameras. The inner diameter of the killflash is 21.4mm, so it should fit The holes are just 6mm in diameter to ensure that a bb can not pas trough and still ensure the best visibility. There…
Pro větší těsnost mezi killflash a optikou jsem použil izolační pásku For greater tightness between the killflash and the optics, I used insulating tape
Killflash meant to press fit onto the front of your romeo5. This doubles as a sacrificial lense cover for airsoft. I couldn't find a model anywhere so I decided to make one. Enjoy Also will work for Aimpoint CompM5s optics also
No clue why the supports don't meet the model in creality slicer. Need assistance.
Whether in airsoft or out in the woods, shiny stuff is really easy to spot. The front of your flashlight is a large perfectly reflective device. Adding a ARD can greatly reduce the angle at which the shiny mirror surface can be seen by…
Someone asked if it was possible to design and print a killflash for an EOTech so I gave it a shot. There's probably other existing models out there already but it was a fun little project. It works better than I expected and would…
Killflash that fits scopes with 26mm ID. Can be scaled to fit other sizes. Use 10-15% octagonal infill and set top/bottom layers to 0.
This is a simple drop in killflash that helps reduce glare. I couldn't find a cheap model online so here you go. Its held in by the stock scope cap. Enjoy!
OpenSCAD code for a cylindrical scope outer killflash. Use https://openscad.cloud/openscad/ to modify and generate an STL. Use the SCAD file to customize for your device and printer.
Threads arent really refined, effectively a pressure fit. Haven't impact tested it but PLA+ should be suitable
Killflash to fit on Predator V3 Tacticon Red Dot Fits like a glove on the Predator V3 Tacticon Red Dot and is simple to press on . Is a tight fit so should never fall off unexpectedly.
Requires small length of shock cord & Ranger Band (if shock cord collar isn't used). Shock cord collar requires (1) M3 nut & (1) M3x6-8 bolt. Notes attached to models for scope compatibility.
