NANO Prusa Protective Face Shield + 8x Stackable!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I modified the RC3 version to make it even smaller in height, which saves about 1/3 Filament per print.
- Rating
- 3.5 / 5
- Likes
- 0
- Downloads
- 355
- Makes
- 0
- Views
- 1,230
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial
I modified the RC3 version to make it even smaller in height, which saves about 1/3 Filament per print.
Logos/Texts are also removed for higher printig speeds.
Print 2 complete Shields (Headband & Bottom) in under 2 hours!
Update
I've created a 8x-stack. <250g Filament for 8 full sets, so you can get 32 full face masks out of one Filament Spool!
I've also improved the Support-Structure, so it won't fall over
Print instructions
Supports are not necessary.
Print with at least 3 perimeters, about 30% infill.
Ideally, print it from PETG.