1 / 3
Enclosure Thermistor Bracket for 2020 Extrusions
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple bracket to mount a 5mm or 3mm thermistor cartridge to a 2020 extrusion. Includes straight and angled versions.
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 80
- Makes
- 1
- Views
- 619
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
A simple bracket to mount a 5x30mm thermistor cartridge to a 2020 extrusion. The thermistor is held by a slight press fit.
Hardware you need:
- 1x M3x8mm Socket Head Cap Screw
- 1x M3 T-Nut/Roll-In-Nut
- 2x Cable Tie
2022-12-03: Added a 3mm version and the .step for the 5mm version.
2023-05-13: Added angled versions (3mm, 5mm, 5mm .step)
Additional Notes:
The thermistor I used is a NTC10K (not the standard 100K) which is not natively supported in Klipper. To get it working I had to define the ‘NTC10K’-Thermistor myself.
[thermistor NTC10K]
temperature1: 0.0
resistance1: 32116.0
temperature2: 40.0
resistance2: 5309.0
temperature3: 80.0
resistance3: 1228.0And to use it:
[temperature_sensor enclosure]
sensor_type: NTC10K
sensor_pin: PF7 #Your sensor Pin
min_temp: 0
max_temp: 100