1 / 3
Mini PC - HUNSN RS39 - router Rack mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rack mount for HUNSN RS39 Mini PC (typically used for pfSense / OPNsense)
- Rating
- 0 / 5
- Likes
- 30
- Downloads
- 96
- Makes
- 0
- Views
- 1,752
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
Printed from PLA (a mistake, use PETG or ASA because mini pc is becoming quite hot), 0.55mm layer, 0.8mm nozzle, 15% infill but any other settings will also work fine.
Device (even without mount) takes more than 1U unfortunately.
Original bottom screw replaced with M3x10mm one (optional but holds device in place).
Design source files attached (fusion 360 and step).
Edit: tighter model added. Stop print at 10% and see if it fits well for your device. Then print it fully.