X-Bows (Knight) keyboard negative tilt raiser / stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a negative tilt keyboard raiser for the X-bows keyboards and their wrist rest.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 35
- Makes
- 0
- Views
- 1,035
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
If you print and like this keyboard raiser, please consider buying me a coffee or use the donate button.
I had several Microsoft keyboards with the option to raise the front and create a negative tilt to the keyboard. This was very comfortable and I was missing it when I switched to the excellent X-Bows Knight keyboard.
I have gone through several iterations since the beginning this year and I have been using this version raiser for the last couple of months. Looking at the dimensions of the X-bows keyboards, this raiser should work on the Lite, Nature and Knight (not the Knight Plus) keyboards.
It is working really well. It is very comfortable and strong. I ave no problems moving or lifting the raiser, keyboard and wrist rest as one.
Print both left and right parts with minimal 3 perimeters and 2 screws with 100% infill. Use a 4mm Allen Key to connect the parts together. There are 6 places for 7mm rubber feet underneath the raiser. The wrist rest stays is place by 2 raised hexagons.
My printing tip: Print SLOW! The parts are very high and tend to wobble when you print to fast.
I have added a extra set with supports to stabilize te print
I had some issues with the PETG I used for my prints so they're not my best. But since they're hidden by my keyboard I don't mind.