X-Bows (Knight) keyboard negative tilt raiser / stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a negative tilt keyboard raiser for the X-bows keyboards and their wrist rest.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 1035
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
If you print and like this keyboard raiser, please consider buying me a coffee or use the donate button.
I had several Microsoft keyboards with the option to raise the front and create a negative tilt to the keyboard. This was very comfortable and I was missing it when I switched to the excellent X-Bows Knight keyboard.
I have gone through several iterations since the beginning this year and I have been using this version raiser for the last couple of months. Looking at the dimensions of the X-bows keyboards, this raiser should work on the Lite, Nature and Knight (not the Knight Plus) keyboards.
It is working really well. It is very comfortable and strong. I ave no problems moving or lifting the raiser, keyboard and wrist rest as one.
Print both left and right parts with minimal 3 perimeters and 2 screws with 100% infill. Use a 4mm Allen Key to connect the parts together. There are 6 places for 7mm rubber feet underneath the raiser. The wrist rest stays is place by 2 raised hexagons.
My printing tip: Print SLOW! The parts are very high and tend to wobble when you print to fast.
I have added a extra set with supports to stabilize te print
I had some issues with the PETG I used for my prints so they're not my best. But since they're hidden by my keyboard I don't mind.