Hadley Eyepiece Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Securely hold 4x standard 1.25" eyepieces. Designed to mount to the Hadley 3D Printed Telescope.
- Rating
- 5 / 5
- Likes
- 41
- Downloads
- 226
- Makes
- 8
- Views
- 1,501
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
This is designed to mount to the Hadley 3D Printed Telescope:
https://www.printables.com/model/224383-astronomical-telescope-hadley-an-easy-assembly-hig
Even though I am using a tripod mount to secure the Hadley, I still use the included Mount Interface part to add rigidity to the overall frame of the telescope. This leaves some hard-points to mount things to.
This Eyepiece Holder takes advantage of one of the 2 mounting points on the Mount Interface and gives a secure means of holding up to 4 1.25" eye pieces.
Hardware:
You'll need 4x #10-24 ¾" socket-head machine screws and 4x #10-24 hex nuts to secure the holder to the Mount Interface.
To secure the eye pieces in the holder, you'll need an additional 4x #10-24 hex nuts and 4x #10-24 ¾" thumb-screws
I printed this in PETG.
No supports required.