Hadley Eyepiece Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Securely hold 4x standard 1.25" eyepieces. Designed to mount to the Hadley 3D Printed Telescope.
- Ocena
- 5 / 5
- Polubienia
- 41
- Pobrania
- 226
- Wydruki
- 8
- Wyświetlenia
- 1501
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
This is designed to mount to the Hadley 3D Printed Telescope:
https://www.printables.com/model/224383-astronomical-telescope-hadley-an-easy-assembly-hig
Even though I am using a tripod mount to secure the Hadley, I still use the included Mount Interface part to add rigidity to the overall frame of the telescope. This leaves some hard-points to mount things to.
This Eyepiece Holder takes advantage of one of the 2 mounting points on the Mount Interface and gives a secure means of holding up to 4 1.25" eye pieces.
Hardware:
You'll need 4x #10-24 ¾" socket-head machine screws and 4x #10-24 hex nuts to secure the holder to the Mount Interface.
To secure the eye pieces in the holder, you'll need an additional 4x #10-24 hex nuts and 4x #10-24 ¾" thumb-screws
I printed this in PETG.
No supports required.