Liczymy pasujące modele…
0.8 MOD gear 60T (for the original focuser wheel of Takahashi FSQ106N telescopes) , which can be applied for focus automation.
A one part Cheshire-style collimation eyepiece (1.25 in). More effective than a standard pinhole collimation cap, especially when lighting is not optimal. Update 02-2025: Added a version of the eyepiece with crosshairs. Make sure to print…
The Hadley telescope by Maff is a great design that allows makers for an easy and cheap introduction to astronomy. There are lots of difficulties when using a telescope for the first time, for me one of them was trying to take a picture…
(From time to time I am asked "Will it work/Could it mount on my X telescope?" for various values of X. Well if I had an X, I would make it work. You could send me an X! But it's cheaper if you make a simple adapter plate - If you don't…
T-ring adaptors for 2" and 1.25", should work on any telescope. The adaptor if of the EF type, it should work on any Canon EOS cameras.
A simple DIY collimation device for reflecting telescopes that can be constructed for about 1/10th the cost of commercial solutions. The main components are a USB Arduino Web Cam , a 42x0.75mm threaded extension tube and a 3D Printed…
A mirror cell for a six-inch Newtonian. It may be rescaled or adapted to metric - the user just needs to identify which hex-bolts will fit after scaling. Note the depicted backplate is not included, it needs serious revision to be…
Solar finder for Vixen/Synta-style finder dovetails used with most telescopes. Get ready for the April 8, 2024 total solar eclipse! This simple device can help you align your telescope (with appropriate solar filter) towards the sun. This…
This needs to be printed with fine layers, try 0.2mm. Use the test prints first (or even shorter slices in your program) just to be sure it has nice action. I might recommend a slightly taller layer height for the inner screw, to prevent…
“The Bahtinov mask is a device used to focus small astronomical telescopes accurately.” This thing is essentially used for astrophotography to get things in focus using diffraction. The short and sweet is that you stick this thing on the…
WARNING: NEVER LOOK DIRECTLY AT THE SUN THROUGH A TELESCOPE, BINOCULARS OR WITH YOUR UNAIDED EYE. This is a tool for a known problem: If your telescope has a sun filter (and it must have a sun filter for looking at the sun!), you can't…
Use this to mount the laser pointer on your telescope. Vixen type mount. Print Details Use PETG or Nylon. PLA is too soft. I used 20% infill so it can hold the force of screws. You will need M3 screws and M3 insert nuts as well with this.
A set of basic 92mm tube rings for telescopes. I made these for my Firstscope 80EQ but should work for any telescope with a 90mm barrel. I reccomend adding a 1mm layer of foam to the inside of the rings to help them grip better and to…
This finderscope is designed to fit Orion telescopes. The part can be printed in place with no supports by laying the back panel flat to the print bed. Use PETG filament so that the part doesn't melt in direct sunlight.
Design This dew shield / scattered light protection was designed for a Skywatcher 150 PDS (150/750 f5) but should also suite for a 150 P or even a 150 Quattro (f/4) as the diameter don't change between this models. The shield rests on the…
These spare mounts aren't expensive, but it's still cheaper to print your own. This is a 1:1 replacement for the original TELRAD mount and you should find screwholes and general dimensions in the same places.. An improvement is that there…
This mount enables you to attach each smartphone to a telescope. It does not matter if the eyepiece is 1.25 inch or 2 inch, the mount can handle all diameters up to approx 2.1 inch. The two pictures of the Moon were taken using this…
Prints very simply. Design includes spacing for a thin adhesive felt/flocking tape, like this one (non-affiliate link). 3MF file includes designs for 714mm & 528mm focal length Bahtinov patterns, make sure you're printing the desired…
I printed with TPU, no support required.
Made for telescopes that use 1.25" eyepieces. Requires a laser, the hole is made for a common 6mm laser module. You can put a round or oval piece of paper inside of it to see the reflected laser beam better. Category: Hobby
Carbon tripod for large telescopes ZWO AM3, AM5 mount compatible. << Caution >> Please secure the carbon tube with tape as it will be upgraded later. To support large weight, set the thickness of the top, bottom, and sides to…
Usage Be aware it is plastik and not as durable as aluminium. Don't use it with too much load (the question what is “too much” is difficult). Use it only for smaller Telescopes. And the colder the less load! Prism rail I want to use my…
i never liked any of the eyepiece cases i saw online, so i made my own i designed it so it can fit even my largest eyepieces, at 4 inches long, and to hold each one securely so that they dont fall out and get damaged, even able to keep…
This is a simple sun finder to be used in telescopes. Point at the sun and when the shadow is centered in the white spot the telescope is aligned to the sun (provided the device is mounted correctly). Print instructions The front disk is…
A simple spraydown mask for quick and easy interior blackening of a Hadley telescope with spraypaint. I prefer industrial flat black. The fit is not perfect, but close enough. I didn't want anything to stick when dealing with wet paint so…
See the instructions on the original.
If I want to stack many hours of astrophoto I need an external battery to power it. And need to hang in tripod. I have one that allow it, and with this box I have it hang in a tripod (Hama). The battery is 102mmx162mmx16,5mm
Print settings Nozzle size ......................... 0.4 mm Layer height ....................... 0.2 Number of perimeters ... 2 Infill ...................................... 25% /100% Supports ............................. enforcers only…
This solar filter holder allows you create your on solar filters for you telescopes or camera lenses. You will still need to purchase a solar filter sheet. You can then cut it to the correct size and glue it to the solar filter holder.…
Not much to say. Needs 2x 35mm or longer M4 bolts, and M4 nuts. Also a way to affix this to your scope (wood screws or machine screws)
I made this for the simple reason that i wanted to mount My Sony A7 to my Telescope which doesnt supply photography. The Problem was that with the normal t2 adapter, the Camera Sensor was a little to far away to focus properly. with this…
Pin-type Sunfinder for Lunt Solar Telescopes I recently acquired a Lunt LS50THa hydrogen alpha telescope with a B600 diagonal blocking filter, and decided not to spend the $45 on the stock sunfinder, knowing it was actually less than $1…
This is to be placed into the eyepeice mount of your 1.25" telescope when a lense isnt needed so no dust settles on your mirror, can also be tied onto the scope with 5mm paracord. mine was printed with a .6 nozzle in PETG with a layer…
I'm using a Mele Quieter PC and the Pegasus Astro Powerbox Micro on different scopes: a Celestron Edgehd 8, a TS Optiocs CF Apo 90mm and a Lunt LS60Tha/B1200/CPT. I wanted a solution to quickly switch the computer to a different rig. I…
For polar alignment of equatorial telescopes using a laser pointer. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts : No Supports: Doesn't Matter Resolution: 0.15mm OPTIMAL Infill: 25% Filament Brand: Doesn't matter Filament…
The subject of the project is an upgrade that changes the way lenses are secured in the focuser. Instead of locking the lens directly with an M3 screw, I have implemented an indirect locking method, similar to that used in focusers with a…
This flat panel design features an inner sloping-wall to self-centre it for an OTA inner diameter of 160mm or bigger. It is built around an EL panel from El Wire Craft UK ( 16cm diameter EL Panel ). It is light weight and will easily sit…
The adjustment screws stay accessible with this design. I also accounted for the curvature of the original screw cover. The curvature near the axis allows for 3d printed shaft couplers with longer screws. The center distance is 54mm __…
Base plate is 100 x 160mm and fitted for SkyWatcher 150P FlexTube. Requires: 4 x 12x3mm strong magnets for base mount 2 x 4x1.5mm for the top side. Additional 2 x 4x1.5 for each interchangeable top plate is required.
Taking dark images with my Newtonian telescope in daylight with just the telescope lid on was impossible - the result was a very bright light and overexposed picture. When I investigated where the light was coming from, I found that it…
A model of the MAGIC Telescopes. Print each part separately and assemble. Use glue to assemble. Supports are required. Use different interface material for easier support removal and cleanup.
A while I ago I made the https://www.printables.com/model/125438-125-crayford-focuser-for-telescopes model and it has been popular. But I wasn't that happy with the 3D model, way too many little things patched up or added in a later…
A T-Adapter for -C telescopes. It fits the back thread of S-C telescopes (2"-24) on one side and a T2/M42x0.75 thread to attach a T-ring. Made in two pieces, so that loosening the back thread ring allows rotating the camera at the desired…
Upgrade your custom telescope build with this precision-engineered secondary mirror mount component. Designed specifically for Newtonian reflector assemblies, this 3D-printable holder features an exact 45-degree angled mounting face and a…
A modular mounting system I designed myself to mount all the electronics on top of my telescope (used for astrophotography). It includes base plates with a size of 150x150mm used to manage the cables with "CableCanalSpacer" on top of…
Gehäuse zur Stromversorgung (nicht nur) von Teleskopen. Das kleinere Gehäuse ist zum Einbau des Mean Well Schaltnetzteils LRS-100-xx vorgesehen. Beim Typ LRS-100-12 stehen dann 12V mit 8,5A zur Verfügung. Das größere Gehäuse ist zum…
The subject of the project is an upgrade that changes the way lenses are secured in the focuser. Instead of locking the lens directly with an M3 screw, I have implemented an indirect locking method, similar to that used in focusers with a…
A T-Adapter for -C telescopes. It fits the back thread of S-C telescopes (2"-24) on one side and a T2/M42x0.75 thread to attach a T-ring. Made in two pieces, so that loosening the back thread ring allows rotating the camera at the desired…
