Tern GSD Strider Bike Rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Put together a little "bike rack" to carry my kid's Strider bike on the back of our Tern GSD. It's designed to clamp…
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 42
- Makes
- 1
- Views
- 1,694
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Put together a little "bike rack" to carry my kid's Strider bike on the back of our Tern GSD.
It's designed to clamp onto the Tern GSD Clubhouse+ (for GSD V2) with the extender bar on (so the angle matches up correctly and you clear the kids' seat). It's fits our Strider bike with the bars turned around backwards. It may work on other balance bikes with different bars, and you may be able to swap sides so the mount sits inboard of the Clubhouse+ for balance bikes with narrower bars.
Print Settings
Printer:
Matterhackers Pulse XE
Rafts:
No
Supports:
Yes
Resolution:
0.1mm
Infill:
20% gyroid
Filament:
Matterhackers NylonX
Notes:
Printed with NylonX. Supports needed for the holes, but I was able to get away with no structural supports when printing with a 0.1mm layer height.
You'll need 4x M3 bolts (20mm long) and 4x nylock M3 nuts to fasten the holders on. You will also need to print 2x of the spacers (one for each clamp).Category: Sport & Outdoors