Spare Part Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Strong 15 * 12 cm box for parts with a removable divider
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 133
- Makes
- 1
- Views
- 925
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This box is based on the idea of "Whity" (Printables, Rugged Box), a very nice project. After seeing it, I designed a completely new box with new hinges, offset of the (optional) rubber gasket into the inside of the box and "flat" surface. You now have the option to use a divider in the middle of the box, and I've added some holes to fix the box with a cable.
The box has the size of 15 by 10 cm and you can seal it with a 2 mm round rubber (option).
You need 6 screws (30 mm by 3 mm) but no nuts.
You do not need any support structures.
I have designed it with Fusion 360.
Update: the rubber gasket (round , 2mm) fits good in the new designed bottom part (Bottom_New.stl). The new version has 1 mm more space for the gasket.