1 / 3
40mm feet for Sliger S620
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
40mm feet for Sliger S620. Improve airflow to the GPU.
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 17
- Makes
- 0
- Views
- 280
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
Printer: Original Prusa i3 MK3S+
Filament: Prusament PETG
Slicer: PrusaSlicer 2.5.0
Slicer settings: 0.20mm Quality preset
Other parts: 10-32 UNF hex full nuts x 4 (one for each corner), rubber bumpons (optional)
Surface finishing (optional): Wet sanding, then apply a coat of Meguiar's Ultimate Black Plastic Restore (see photo)
Installation procedures:
- Unscrew stock feet
- Put nut into a printed foot, shake gently until it lies flat
- Screw to case whilst using a large flathead screwdriver (or similar) to keep the nut flat