Counting matching models…
This might be the most fun print you've ever tried because, since it's just a DIY paper airplane modification, you can see your own creation fly into the distance with no problems at all Assembly To install the hook, you first need to put…
Problem : The case has limited space for hard drives, and using the 3.5" bays blocks the use of 2.5" slots. Solution : Add a 3D-printed drive shelf that uses the existing 120mm fan mounting pattern. Design : Each shelf can hold one 3.5"…
rear mount: v1 - 4 screw (6-32 - standart PC screws) v2 - 6 screw (6-32 - standart PC screws)
Rear Exhaus FAN Bracket for Sliger cases / 120mm FAN / 120mm radiator / 120mm AIO rear mount - 4 screw (6-32 - stand
These are feet I designed for my Sliger SM570 which allows me to use 120mmx25mm case fans under the case. They allow the use of the stock hardware; stock lock ring nut can be removed from rubber feet easily. You can see from the photos…
The Linkup PCIE 5.0 riser cable is not compatible with the original bracket that comes with the Sliger SM580/SM570. The mounting holes do not line up. I decided to design my own bracket that will fit the Linkup riser cable. The holes to…
Problem : The Sliger CX4200A case lacks integrated mounting points for rear exhaust fans. Solution : Use 3D-printed parts to mount two 60mm fans at the rear of the case. Design : The fans are mounted by sandwiching them against the rear…
I present the Cerberus SFX-Stendo Plate . This plate offsets the PSU by about 50mm when mounting it to the rear case, allowing for easier access to the CPU. This also lets you use the Arctic II 240mm AIO which would otherwise be…
For .f3z: Fusion 360 → Design → Configure Table (on Ribbon bar) → Pick Fan Width Created with M4 screws + nuts for fan to chassis mounting but you can change it to whatever. Had successful prints with: * Brim / brim ears * More than 4…
Printer: Original Prusa i3 MK3S+ Filament: Prusament PETG Slicer: PrusaSlicer 2.5.0 Slicer settings: 0.20mm Quality preset Other parts: 10-32 UNF hex full nuts x 4 (one for each corner), rubber bumpons (optional) Surface finishing…
spacers for Sliger's (now Discontinued) CX-RAIL
This is a very quick-and-dirty mount to put a slim slot-loading optical drive behind the front panel of a Sliger S620 PC case. You will need four M2x2 screws to mount the bracket to your drive. You will also need three screws to mount the…
Panel for mounting the power button and USB connectors in Sliger S620/S610 cases. Print Instructions 0.2 mm layers, 100% infill. The printed panel is only 1 mm thick and will flex easily. Use the most rigid filament that you have that…
These adapters lock Sliger 2U cases directly into the Ubiquiti Toolless Mini Rack using the same side locking screws as most Ubiquiti equipment. Be sure to copy the model in the slicer and mirror one of the copies along the X-axis so that…
Originally I've made this bracket for Arctic Liquid Freezer III Pro 240 to fit into Sliger CX4710i rack case alongside 140mm intake fan mounted on a similar bracket (sliger only supports 120mm fans). I needed to move it around 20-30mm to…
The Linkup PCIE 5.0 riser cable is not compatible with the original bracket that comes with the Sliger SM580/SM570. The mounting holes do not line up. I decided to design my own bracket that will fit the Linkup riser cable. The holes to…
These adapters lock Sliger 2U cases directly into the Ubiquiti Toolless Mini Rack using the same side locking screws as most Ubiquiti equipment. Be sure to copy the model in the slicer and mirror one of the copies along the X-axis so that…
The motherboards in both of my servers do not have a usb-c header, and I didn't want the cable just chillin in the chassis, so I made a blanking plate that replaces the cable so that there isn't a hole in the front IO. This filler should…
This fan shroud is remixed. Raised it up so it could clear the 8-pin cable at the bottom of my x870e MSI Carbon. Original is linked from thingverse if you don't need the extended version. I am not a pro so there might be issue with the…
I only printed a skeletonized version of this to verify dimensions and fitment. Dimensions are correct but I didn't do anything to optimize the model further. The plate is 5 mm thick the rack ear is 3.5mm thick. Overall footprint is 87.88…
Made this to give rear support to my Sliger CX2177a in a Gator Case 4U rack case. Designed for posts that are 18" apart front to back. I have not tested compatibility with other models but this might work with Sliger's other 2U cases as…
2.5in SSD caddy for the hot swap bays on the Sliger CX3701 storage server case. This might also fit the CX4712 or other Sliger storage cases, but I can't guarantee it. Printed on a Prusa MK3S+ with eSUN PLA+, but I'd recommend PETG to be…
Purpose : Mounts a pair of standard breadboards for circuit development within the case. Design : Uses 9x M3x10mm bolts to secure the breadboards to the hard drive tray. Allows for prototyping and development of projects, like the…
