Sliger CX3701 SSD Caddy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2.5in SSD caddy for the hot swap bays on the Sliger CX3701 storage server case.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 53
- Makes
- 0
- Views
- 531
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
2.5in SSD caddy for the hot swap bays on the Sliger CX3701 storage server case. This might also fit the CX4712 or other Sliger storage cases, but I can't guarantee it.
Printed on a Prusa MK3S+ with eSUN PLA+, but I'd recommend PETG to be more heat-resistant within the server case.
Settings:
- .20mm layer height
- 15% infill
- Supports under front handle, guide pins, and guide arm. See pictures for an example.
- 2 Perimeters
- No Brim
- No Raft
The guide arm might cause a bit of a tight fit when sliding the caddy into the chassis. Additionally, since it tends to flop around a bit, it may cause problems with the CX3701 locking mechanism. I recommend cutting the guide arm off if it causes you too many issues. The caddy will still function OK without it, but the drive locking mechanism won't be as effective.