Sliger CX3701 SSD Caddy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2.5in SSD caddy for the hot swap bays on the Sliger CX3701 storage server case.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 531
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
2.5in SSD caddy for the hot swap bays on the Sliger CX3701 storage server case. This might also fit the CX4712 or other Sliger storage cases, but I can't guarantee it.
Printed on a Prusa MK3S+ with eSUN PLA+, but I'd recommend PETG to be more heat-resistant within the server case.
Settings:
- .20mm layer height
- 15% infill
- Supports under front handle, guide pins, and guide arm. See pictures for an example.
- 2 Perimeters
- No Brim
- No Raft
The guide arm might cause a bit of a tight fit when sliding the caddy into the chassis. Additionally, since it tends to flop around a bit, it may cause problems with the CX3701 locking mechanism. I recommend cutting the guide arm off if it causes you too many issues. The caddy will still function OK without it, but the drive locking mechanism won't be as effective.