50 cm full-printed meter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D printed meter with with usable length of 50 cm. Only some glue needed, two possible variants of numbers marks.
- Rating
- 0 / 5
- Likes
- 56
- Downloads
- 56
- Makes
- 0
- Views
- 1,146
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
This is meter keyring with function measurable length of 50 cm.
Printings description:
Box parts, shaft, coil walls and wheel is not important what material or color you will choose.
More important is meter tape parts. It must be printed at maximum 0.1mm layer thickness. The model needs to be turned for 40 degrees to be diagonal on sheet. I have tested a PETG with different colors, numbers styles and highs. I recommend to use a black PETG as a numbers because it covers the surface great with almost zero transparency and some light Color background because an inverted setting is then difficult to read (example of black background and red numbers) The numbers shoud be only 0.1 mm ( downloadable model) high if they are higher they unstick if tape is folded ( in example of red background and white numbers are already some numbers missing)
examples:
The assembling instructions in pictures:
Done 🙂🙂🙂