1 / 7
Wallet SD Card and Micro SD Card Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This SD card holder has been modeled to be as thin as possible (4.4mm). Stores easily in a wallet.
- Rating
- 3.75 / 5
- Likes
- 92
- Downloads
- 912
- Makes
- 9
- Views
- 3,095
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I wanted an SD card and micro SD card storage that would fit in my wallet. I couldn't find anything that matched. So I modeled the following in fusion 360. Below is the criteria that I was looking for.
- Fit in my wallet (4.4mm thick)
- Printed fast
- Stored as many SD cards and Micro SD cards as possible
- Everything was pressure fit including the cards and the case
- The case can be separated without sliding the entire cover
The models were printed with a 0.4mm nozzle and a 0.2mm layer height using PLA.
Soloo