Voron 2.4 Rear CANBUS Umbilical Mount IMPORTANT UPDATE
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Voron 2.4 Rear CANBUS Umbilical Mount
- Rating
- 0 / 5
- Likes
- 76
- Downloads
- 725
- Makes
- 2
- Views
- 6,561
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I am upgrading to a CAN setup on my Voron 2.4 and I needed Rear mount and Y endstop relocation bracket. I remixed this excellent model intended for Huvud to better fit my needs.
IMPORTANT UPDATE No More Cable Gland, Could not overcome clearance issues. Same with the Fan mount.
v13 - Taking it back old school… grumble No more cable gland. Split body to make it easier to assemble. Should snuggly hold a 10mm umbilical. I may repost V10 with a bumper for Y clearance.
Check and recheck your clearances before homing! I found out the hard way I had interference
*Side note not related to model. If you are using EBB36 on a Galileo, you need a thinner Z chain for the same reason. I ended up doing all umbilical.