1 / 1
Giacomini Clip Clap adapter to M30×1.5
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an adapter for Giacomini Clip Clip radiator valves, to M30×1.5 thermostatic heads.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 247
- Makes
- 1
- Views
- 1,201
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
This is an import and model fix from https://www.thingiverse.com/thing:4677101.
I just printed it for my radiator and my Moes radiator thermostat.
Print Settings:
Material: PETG / ABS (PLA might be too hard, it should bend a little)
Print orientation: I printed it as is, but it might be easier upside down!
Layer height: 0.2 is good
Infill: 20%
Supports: with supports, you might want to forbid supports on the thread.