1 / 1
Giacomini Clip Clap adapter to M30×1.5
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter for Giacomini Clip Clip radiator valves, to M30×1.5 thermostatic heads.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 247
- Wydruki
- 1
- Wyświetlenia
- 1201
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (16)Powiązane
This is an import and model fix from https://www.thingiverse.com/thing:4677101.
I just printed it for my radiator and my Moes radiator thermostat.
Print Settings:
Material: PETG / ABS (PLA might be too hard, it should bend a little)
Print orientation: I printed it as is, but it might be easier upside down!
Layer height: 0.2 is good
Infill: 20%
Supports: with supports, you might want to forbid supports on the thread.