Anker USB C Power Strip Mounting Brackets
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.88 – €2.30 net (excluding VAT)
For file: Anker PD3 Power Strip.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.09 excluding VAT (range midpoint).
- Weight reported by the author
- 26 g
- Print time reported by the author
- 2.1 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
For easy power strip mounting while keeping access to all USB ports and power plugs.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 76
- Makes
- 0
- Views
- 608
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
For easy power strip mounting while keeping access to all USB ports and power plugs.
Modeled in Tinker CAD, I did manage to make the brackets just a bit taller than I needed to. I used a couple rubber dots on the pads of the power strip to make it fit a bit more snug. You could shrink them in your slicer by 1.5-2mm to tighten it up as well.
5mm holes to mount the strip to the surface of your choice. I mounted it to the underside of my LACK table, and it works well powering my Mk3, Raspberry Pi 4, and a webcam.