Counting matching models…
With these hooks, you can attach your Anker PowerPort Speed 5 (or other similarly-thick power hub) to your Honeycomb Storage Wall. From there, you can leave USB cables hanging in the cable hangers (see original model) and leave your…
Based on design for other anker USB hub. I attach this using command strips but added a version with holes for M3 countersunk screws as well. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .20…
I used simple double-sided tape to attach to the wall.
I spend the last few days designing and developing a simple mount for my Anker PowerPort 6 USB charger because it took away too much space on my desk. So I decided to attach it to the side of my wooden desk. To design it I used Autodesk…
Desk mount for a Anker PowerPort Atom III Slim Charger to be mounted under the table. The main goal was a tight fit for easy cable plugging and unplugging without any wiggling. Edit I made this model because there was none when I first…
This is a holder with screw fittings for the Anker PowerPort 6 Lite USB charger. There are two files: original with 0.5mm play/gap between holder and PowerPort tighter fit with 0mm play/gap between holder and PowerPort Original OnShape…
Raspberry PI stack mount for ANKER PowerPort 5 USB charger. Compatible with Raspberry Pi Stackable Tray . You can also check the OpenSCAD sources at my GitHub repository . Category: Computer
Story Step two of clearing up the cable mess under my desk is this mount for the Anker PowerPort Atom III Slim charging hub. Nothing fancy, all functional. My Design The mount can be screwed into the mounting surface with three 4 mm…
Holder for the Anker PowerPort 6 usb-A powersupply. Print time about 6 hours. 0.5mm tolerance fit. gets screwed on.
A holder for Anker's slim 65W USB-A + USB-C power adapter. Can be mounted to a wall, under a shelf or whatever with double sided tape or via the two M2.5 screws. I had my power brick stuck to my bedside table with double sided tape for a…
Anker PowerPort 5-Port USB C 60W Case Wall Mount
Anker 40W 5-Port USB Wall Charger PowerPort 5 Under Table Mount
Holder for an Anker Powerport | PD on an Ikea Skadis. Category: Tool Holders & Boxes
This is a holder I designed to fit my 5 port charger to my skadis pegboard. It's a bit quick and dirty but it works well for me.
These models are based off of a PowerPort™ Implantable Port designed at Ann & Robert H Lurie Children's Hospital of Chicago. It's intended use is for medical education and fostering medical play opportunities. The model is designed based…
Anker's GaN chargers are my favorit. As they are quite slim I thought it might be a good space-saver idea to make a wallmount. I put two standard countersunk holes on its middle but you can securely mount them using 3M's command tapes as…
Took the Anker Power Port 6 Lite Holder by BHainesUK and modified it, so I could easily mount it to my Skadis Peg Board on my desk. decided to Use the universal Peg so it can be printed without supports and is more versatile. To use it,…
Can be mounted with command strips or via 3 screws using the countersunk holes in the model. Combine it with my other model for easy cable management! Velcro cable tie mount Printed in eSun PETG solid white with the 0.20mm QUALITY profile…
Simple mount for the Anker desk charger.
This is a holder for the Anker "PowerPort I PD with 1PD and 4 PIQ" I designed it in solidworks. It may work with other chargers, but I can't confirm. I have the hole offset; let me know of it needs tweaking, because I made this change…
Anker Powerport 6 Holder. v2 I recreated the model from Fusion360 to FreeCAD and made some improvements - More rounded corners - The height is now 51mm so it it should fit standard 50mm carpet tape. - FreeCAD design is now added to this…
A friction fit rack mount holder for my Anker PowerPort 10.
Being fed up with the mess of chargers and cables lying around in my living room, I created this charging stand/dock/base (whatever you want to call it) to hold up to three smartphones. Its base is designed to hold an Anker PowerPort Atom…
An under-desk mount for the Anker PowerPort 60W 6-port family-sized desktop USB charger. It does require some bridging. The PowerPort has a particular orientation (see photo), so the blue LED is mainly covered. I screwed mine to the…
Mounts to the underside of a desk with 4x countersunk screws. Nice and cozy fit and won't tear out when you insert or remove a cord. I printed with a 0.6mm nozzle at 0.4mm layer height so no need to print with a small layer height!
Vertical stand for the Anker Powerport Speed 5 USB power charger Full Base 2023-03-26 - Added new "Full Base" version which completely cradles the base of the charger. Original Original independent stands. Print two of the stands. Each…
Für Version mit 1x USB C PD und 4x USB A entwickelt
ANKER PowerPort Speed - 5 Port - Holder\Mount This is a holder I made for the Anker PowerPort Speed 5 Ports which sits behind my TV unit. The hook is added so it can hang off the back of the unit from a cut out which the cables run…
Remixed this model to mount it on my skadis board. Stick the backplate on the holder and use the great mounting solution from @LayerCake ( https://www.printables.com/model/212510-ikea-skadis-xbox-one-controller-holder-with-lip/files )…
Anker 6 port charger cover for under-desk mount
Since i got my S8+ the stand i used for my S7 ( https://www.thingiverse.com/thing:2744960 ) is not fitting anymore (qi plate too low). So inspired by the old stand i designed something very similar, only fitting for my S8+. Should work…
This is a holder for the Anker Powerport 60w charger. User small supports under the holders.
The "PSU: IKITS 22W 4 Port Phone Charging Station" is no longer available so I got an Anker Powerport6, its a little bigger than the old PSU but its a big brand and well made so it should be around for the foreseeable future. I modified…
Designed this model with the use of D14mm Magnets. It holds the charger from anker under the desk in place and with the magnets it can be easily dismantled to connect the cables on the desk and then place it back under the desk. depending…
This 2 part mount allows you to recess your Anker PowerPort brick into a desk or other surface. the main mount holds the brick and has vents on the side to make sure the power supply does not overheat. The faceplate piece covers up the…
Slide-in Anker PowerPort 5 USB power supply mount to connect to openGrid via multiconnect. It's slightly wider than two rows and longer than three rows. Printed upright 0.2mm Layer no support needed
4 port big phone charging station for Anker PowerPort 6 A2123
The Anker Powerport Speed 5 is a good 5-ports fast USB charger but is designed to sit flat on a desk. I created a vertical stand for it so it takes less desk space and even looks better. Print Settings Printer Brand: Creality Printer:…
I needed to attach my Anker USB Charger to a sideboard, so i designed this easy model. Printed it with brim, no supports, PLA+. The mount has perfect round edges with a 7mm radius, the charger fits quite well and doesnt move in the…
UPDATE: New Version v1.0 Old Version v0.5 I wanted to make better use of the space next to my sofa and avoid constantly searching for my charger. So, I designed a custom holder for the Anker PowerPort 6 that can be conveniently mounted on…
This is a holder for the "Anker PowerPort 5-Port USB C" ( https://www.amazon.de/gp/product/B072K4TB67 ) charger to mount under the tabletop. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution:…
A 80mm desk grommet to mount an [Anker Power III 120W USB-C Charger]( https://amzn.to/3AeaHGb ) in your desk. Grommet can be fiction fitted (depending on your printer tolerances) or can be secured with built-in cable tie attachment points.
passend für: https://www.amazon.de/gp/product/B00VUGOSWY/ref=ppx\_yo\_dt\_b\_asin\_title\_o07\_s00?ie=UTF8&psc=1 Category: Other
Remix with reinforced sides, because the original broke to easy.
Mount an Anker USB Charger under your desk with a 25 gram two piece bracket. Supports Model A2063 PowerPort+6 QC 3.0 USB. Uses 25 grams and about 1 hour of print time (PETG). Rounded fillet corner design prevents charger from sliding out…
Custom holder for the Anker PowerPort Speed 5 charger , designed for the IKEA SKÅDIS pegboard. The charger can be mounted with the charging port facing up or down , allowing flexible placement and easy access to the ports while keeping…
This is a holder for the Anker PowerPort Atom III 65w Slim charger Print with 3 walls, 15% infill. Needs supports for the push-fit. It uses a push fit to attach it to the multiboard. You can need to insert a snap into your multiboard to…
I made this mount to allow my Anker PowerPort to be cleanly mounted on the wall. It's meant to be printed upright as it's modeled, no supports are needed. The mount has roughly 1mm of wiggle room all the way around so this wouldn't work…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 I need space in the workshop as well as some USB power, so I scanned my Anker PowerPort Atom III and made this flexible mount using a cross section of the scan. The fit is excellent - not too tight, not too loose. There are…
This is a basic wall mount for the Anker A9122 PowerPort Strip PD 2 Mini . It fits pretty snugly and prints without support. Link to the Anker A9122 PowerPort Strip PD 2 Mini
Fits the Anker Power Port model A2056 charging station https://www.amazon.com/dp/B072K5ZJXF/ This mount station allows you to firmly hold the charging station and then remove the gate to release the charging station. I have included the…
The dashboard uses a Guiton JC8048W550 module with an assortment of sensors. I plan to use it to control some lights and sorts. The DIN mount holds a USB Power supply (Anker PowerPort 6) and acts as a riser to hold the screen outside the…
Could not find a suitable thing to fit my PoE in my rack. So here it is, for the 15W Ubiquiti PoE adapter. Check the original model for blanks. And I also use the Anker PowerPort 6 to power some devices in my rack. The main "rack bracket"…
The original was just a little too large for a snug fit which I'd planned to mount so that the USB ports were facing the rear of my mini-rack. I resized the model to fit the PowerPort 6, and rotated it to hang "horizontally" on the left…
