Prusa Protective Face Shield - RC2/3 Clear Sheet Drilling Template 20200406
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 240 wide template for drilling Clear Sheets to fit the Prusa Protective Face Shield - RC2/3.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 61
- Makes
- 0
- Views
- 583
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial
A 240 wide template for drilling Clear Sheets to fit the Prusa Protective Face Shield - RC2/3. A couple of extra holes (see my remx) to provide different (A4 portrait) mounting options. I use 6mm holes for the Prusa Shield with generally good results. You could drill the extra two holes at 8mm to account for hand drilling accuracy issues - or not drill them at all if you don't need them.
The template holes for the stock Prusa RC2/3 frame put the top of the clear sheet about 1mm below the top of the Shield frame - this is slightly higher than on the Prusa clear sheet drawings.
Regarding A4 I suggest using A4 landscape and avoiding remix-fudges-etc. Practice on paper cardboard before using precious clear sheet to ensure this works as you expect it to - you know it makes sense!
Edges center notched for lining up if you need to do that.
Text not tidy, sorry.
Update: 20200406
- Eased holes closest to the left and right egdes out by 1mm to make fitting the clear sheet to visors easier.
- Updated text.
- Added half notches for lining up on top edge of the clear sheet for the Brazil remix.
- Added 0.6 nozzle files.
Print instructions
For best results print stock 0.4 settings. I have also printed 0.6 - quicker but not as nice looking and accuracy may not be quite as good but I'm using it printed 0.6 without problems.