Lighthouse
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
STL and GCode files sized to fit Prusa MK3S perfectly. (72mmx106mmx194mm) No supports or brimming needed.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 69
- Makes
- 0
- Views
- 643
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution
This lighthouse is based on the Assateague Virginia lighthouse. The two included files are a GCode file and an STL file. Both can be printed without brimming and without supports. I used 10% infill with good results.
GCode File
I added 4 print pauses to the included GCode for Prusa MK3S printers. This means the print will pause 4 times in order to change the colors of your filament. The pauses occur at 48mm, 87mm, 123mm and 156mm.
STL File
The included STL file is 72x105x194mm when printed at full scale. If you want multiple colors, the full scale model should be paused/color changed at 48mm, 87mm, 123mm and 156mm.
Thank You