Pi Camera Housing for Original Prusa Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.57 – €3.14 net (excluding VAT)
For file: Pi_Camera_Mount_0.15mm_PETG_MK3S_3h22m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.86 excluding VAT (range midpoint).
- Weight reported by the author
- 27 g
- Print time reported by the author
- 3.36 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Fully adjustable Pi Camera Housing to use within the Original Prusa Enclosure.
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 112
- Makes
- 2
- Views
- 1,152
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Fully adjustable Pi Camera Housing to use within the Original Prusa Enclosure.
The housing is designed to be used with 5MP Akozon 175° fishey camera which is available on Amazon.
The holder itself will fit in the original prusa enclosure at any position where you have one hole and one zip tie holder available to use. I used the left profile within the middle to mount it. Use one M3x5 Screw and a zip tie to secure it in place.
To assemble the holder you will need the following Parts:
- 4x Ruthex M2 threaded inserts
- 3x Ruthex M3 threaded inserts
- 1x Ruthex M4 threaded inserts
- 4x M2x4 Socket Head Screw
- 3x M3x5 Socket Head Screw
- 1x M4x6 Socket Head Screw
Parts can be printed without any support.
UPDATE: if you also got the LED for your enclosure, I have made an update to the camera holder. You can find it here:
https://www.printables.com/de/model/333612-pi-camera-housing-bracket-for-prusa-led-addon