Wheel Design for [thing:5019195]
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Trying out some new TPU & decided to print a tyre, chose this one:https://www.thingiverse.com/thing:5019195 I found it…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 26
- Makes
- 0
- Views
- 133
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution
Trying out some new TPU & decided to print a tyre, chose this one: https://www.thingiverse.com/thing:5019195
I found it easier to split the tyre & print both halves, then use CA glue to join them.
I have included the 2 split tyre files.
Not just happy with the tyre, I knocked up a quick wheel design for it, again, two halves that are inserted from each side of the tyre & CA glued together.
You'll need a bit of force to push and hold the two wheel halves while gluing, so be aware, I purposely designed them to be tight and ever so slightly narrow.
Designed for 0.4mm nozzle @ 0.2mm layer height.
Print in orientation as is.
Supports are required for the wheel rims.
Centre hub takes a 6mm shaft.
Happy Printing ;)
Category: Vehicles