V-Core 3 replacement X Endstop Block
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sturdier alternative to the stock X Endstop block that is needlessly flimsy to install
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 46
- Makes
- 0
- Views
- 439
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
The RatRig V-Core 3 is a beast. Everything is designed extremely sturdy and thought through. For some reason however, the X Endstop Block makes the exemption here. For some reason it is designed in a way that you cannot screw in the screw holding the part without risking it to wreck the part. There is a 1mm gap on the bottom that causes the lips to tear off when you tighten the screw even slightly.
My replacement part reduces the range that you can move the part around for fine-tuning and on the other hand allows the screw to set firmly, reducing the risk of it shaking loose over time. It is 100% compatible to the original part.
See the two screenshots for the differences (left is my part, right is the original x endstop from RatRig)
As always with the source FreeCAD file.