ZOHD Nano Talon Evo VTX and Antenna Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted a clean way to mount the VTX and Antenna on my Nano Talon Evo. These parts mount to the underside of the…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 0
- Views
- 269
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a clean way to mount the VTX and Antenna on my Nano Talon Evo. These parts mount to the underside of the nose/canopy lid and are out of the way of the battery etc. You'll need to cut a 17mm hole in the lid for the antenna mount. The VTX-holder sits on the ribs under the lid. Both are held on with a drop or two of CA. That VTX is 22mm wide and there is a groove in the holder to slide it into. It sits just behind the NACA duct so it stays cool during flight.
Print Settings
Printer Brand:
Anet
Printer:
A4
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
20
Filament: Filaments.ca PETG Black
Notes:
Supports on for VTX Mount. Low infil = low weight. Printed on an Anet ET4
Category: R/C Vehicles