Ammonite Trailer Hitch Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ammonite cover for a 1.25-inch trailer hitch.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 51
- Makes
- 0
- Views
- 579
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
An ammonite fossil trailer hitch cover. 1.25-inch square, and 5.5cm depth to the tabs. No additional parts are necessary: the included tabs have enough spring action to fill the holes in the side of the hitch.
Print in PETG or some other higher melting point material: PLA will melt in the sun!
I printed it with the fossil on top, using a lot of supports. Printing fossil down will require fewer support material, but you may need to do some sanding afterwards, which could be tricky with this surface.
This is a simple mix of the ammonite from https://www.thingiverse.com/thing:88025 by Museum Victoria, and the trailer hitch cover from https://www.thingiverse.com/thing:4831452 by dmccombs. The TinkerCAD project is available at https://www.tinkercad.com/things/38JZPaQTAc5-amazing-inari-uusam/edit?sharecode=MEkV9zpuILldhEmkcFI4H-E0qyMJp2t9bswG2CDPm5c.