Johnson/Evinrude Roller and Sleeve p/n 397499
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement part for Roller and Sleeve for Johnson/Evinrude outboard motors. p/n 397499.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 56
- Makes
- 0
- Views
- 354
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I did not want to spend $27 for a tiny roller so I took measurements with a caliper and duplicated the part. The only difference is that this is not two pieces with a clear roller over an inner ring, it is a single part. Functionally it works identically.
Print in PETG for chemical resistance, and use 100% infill. PLA is not fuel/oil resistant.
I printed with .07mm layer height to ensure the smoothest possible surface and still sanded slightly when it was done, particularly over the start/end seams.
Fit on the shaft is nearly identical to the OEM part. A drop of light machine oil and it glides extremely smoothly.