Baofeng GT-3TP dummy battery
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dummy battery for Baofeng GT-3TP.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 42
- Makes
- 0
- Views
- 522
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Dummy battery for Baofeng GT-3TP
I'm using external power supply → 7.5V 1A
The connector is barrel plug 5.5mm x 2mm (fourth picture).
The fifth picture shows the copper contact (use 0.5 mm thick copper). Holes for soldering wires on to the contacts are a little bit small but it is doable. Easiest way to solder onto the copper is to put a metal plate under plastic so that the plastic keeps its shape (last picture).Also, there is a thin layer (0.28mm) just before 90° gap so the bridging is easier. After, printing remove this thin layer and insert the adapter.
Print vertically.
Before usage check polarity of the contacts.