Google Pixel 6 (Magsafe) Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A slim case for the Google Pixel 6 with camera protection and option of adding "Magsafe" magnets.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 121
- Makes
- 2
- Views
- 1,766
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
A slim case for the Google Pixel 6 with camera protection, a lip for the display, and the option of adding "Magsafe" magnets.
Print the "case" file once (either with or without Magsafe) and print the "camera protection" file twice.
Only use TPU! Any other fillament will not work.
The slower you print, the better the case will come out.
To print the MagSafe variant, you need the corresponding magnets.
Just search for "MagSafe Magnets" on eBay or AliExpress and look for some that are like the ones shown in the last picture. To add the magnets to the case, just pause the print at the end of layer 1.2 and put the magnets in the grooves (like in the pictures). Make sure that they are in the correct orientation.
After that, resume the print and make sure the printer prints correctly over the magnets.
After printing, all parts either need to be glued together as seen in the picture or melted together using a soldering iron.
Feel free to post a Make!
This is a remix of this case found on Thingyverse.