Box for Raspberry CM4 Computemodule on CM4-IO-Base A
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.05 – €0.06 net (excluding VAT)
For file: compute_module_fan-abdeckung_kabel_cam1_0.15mm_PETG_MINI_3m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.05 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 2.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Case for Waveshare CM4_IO-BASE_A module with fan, external antenna and Raspi Cam holder.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 44
- Makes
- 0
- Views
- 411
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Raspberry case for Waveshare CM4-IO-BASE-A module.
It is possible to mount two different raspi cam modules on top of the cm4 and to use a fan and a external antenna. For modification a freecad file is provided.
You can choose between two different camera modules in the FreeCAD file. Use the spreadsheet and select module 0 or 1. All necessary parts can be found on Amazon. They are shown in the pictures.
I use the cm4 for octoprint, pihole, ubound and home assistant. Temperatures are around 45°C with fan and 55-58°C without.