FabScanPi - Holder for Calibration-Pattern Sheet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an redesigned version of the calibration-pattern holder which is needed for FabScanPi software version 0.4.0.…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 73
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This is an redesigned version of the calibration-pattern holder which is needed for FabScanPi software version 0.4.0. and beyond. It was optimized to reduce printing time and material consumption.
There is also a version for the FabScanPi SandwichBox. For that one you will need an M5 x 16 screw, washer and nut. And one M3 x 16 screw, washer and nut. Because it's adjustable design you can probably use it on you own design of the turntable. To use it you'll need to remove one of the turntable's four fixing screws.
Category: 3D Printing