Precision opto probe for auto bed leveling
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This thing gives you the ability of probing your heatbed with all the benefits of an opto endswitch - like a constant…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 39
- Makes
- 0
- Views
- 483
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This thing gives you the ability of probing your heatbed with all the benefits of an opto endswitch - like a constant switchpoint and almost zero wear-out. A minimum of moving parts and a maximum of reliability.
Workload / Time :
- About 30 min. for printing
- 20 min. for modifying the screw (can be done while printing)
- 5 min. for assembly / adjustments
= Total: ~ 35 to 60 min.
Instructions
Print the probe body.
- Versions for Graupner Servo Family
- Versions for SG90 9G Micro Servo
Each type is available for mounting the arm either from top or back (reverse).
Things to buy (vitamins):
- 2x M5 nut
- 1x M5x40 screw
- 1x spring about 14mm length, 7,3 mm width (or whatever fits)
- 1x Opto endstop with TCST2103 (standard) type light barrier
Use a file to form the upper end of the screw into a flat swordlike surface (length about 10 - 12 mm).
Remove screw head from the other side and form a tip end with the file.
Assembly :
- Slide the screw into the body (swordalike end first). Add the two nut and the spring.
- Put the sword end into the slot and move both nuts down the thread.
- Adjust the moveable length of the screw by turning the nuts.
- Fix the nuts by turning against each other.
- Attach everything to the servo by using a standard servo arm. Probably an additional small hole for the fixing screw must be drilled.
Category: 3D Printer Extruders