1 / 5
Megatronics 2.0 Mounting for MendelMax
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This thing should help you to fix your Megatronics 2.0 board on your MendelMax printer. Easy, stable and dependable…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 131
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This thing should help you to fix your Megatronics 2.0 board on your MendelMax printer.
- Easy, stable and dependable mounting.
- Update: This version has several 3mm holes where you can create a pull relief for the cables by using small cable ties.
- Optional fan mount for standard 80mm fan.
- Can be used with "LCD Display and Controller Mounting" http://www.thingiverse.com/thing:220691 for comfortable autonomous printing.
Instructions
- Print "Board for Megatronics" on MendelMax.
- Fix the Megatronics-PCB by using 6x M3x12, washers and nuts.
3a. (Option) without top mount for fan:
To fix the mounting on the printer you need 3x M5 screws.
3b. (Option) with top mount for fan: If you want to use the top mount for the 80mm fan you'll need 3x M5 threaded rod (Length: tbd.) instead of the 3x M5 screws.
- (Print and install a fan grid from another project.)
- Print "Fan Board" and 4x "Spacer".
- Fix fan on "Fan Board" with 4x M4 screw, washers and nuts.
- Connect "Fan Board" to "Board for Megatronics" by using the spacers in between on the threaded rods.
Category: 3D Printer Accessories