1 / 5
Megatronics 2.0 Mounting for MendelMax
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This thing should help you to fix your Megatronics 2.0 board on your MendelMax printer. Easy, stable and dependable…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This thing should help you to fix your Megatronics 2.0 board on your MendelMax printer.
- Easy, stable and dependable mounting.
- Update: This version has several 3mm holes where you can create a pull relief for the cables by using small cable ties.
- Optional fan mount for standard 80mm fan.
- Can be used with "LCD Display and Controller Mounting" http://www.thingiverse.com/thing:220691 for comfortable autonomous printing.
Instructions
- Print "Board for Megatronics" on MendelMax.
- Fix the Megatronics-PCB by using 6x M3x12, washers and nuts.
3a. (Option) without top mount for fan:
To fix the mounting on the printer you need 3x M5 screws.
3b. (Option) with top mount for fan: If you want to use the top mount for the 80mm fan you'll need 3x M5 threaded rod (Length: tbd.) instead of the 3x M5 screws.
- (Print and install a fan grid from another project.)
- Print "Fan Board" and 4x "Spacer".
- Fix fan on "Fan Board" with 4x M4 screw, washers and nuts.
- Connect "Fan Board" to "Board for Megatronics" by using the spacers in between on the threaded rods.
Category: 3D Printer Accessories