1 / 1
Rasberry Pi Camera Bed Mount for Prusa MK2.5S (lengthened) — image 1

Rasberry Pi Camera Bed Mount for Prusa MK2.5S (lengthened)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Based on jgeyer's mount, and made the following changes Lengthened by 10mm to clear the angled print fan of MK2.5 and…

Rating
0 / 5
Likes
1
Downloads
14
Makes
0
Views
456
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution

Based on jgeyer's mount, and made the following changes

  1. Lengthened by 10mm to clear the angled print fan of MK2.5 and MK2.5S
  2. Enlarge bottom hole where heat bed screw-head fit in, to avoid heat bed screw getting stuck during uninstallation.
  3. Limited chamfer to 45 deg for no overhang
  4. Adjusted mouth opening dimension to better fit the heatbed carrier frame, adjusted for overhang.

Print Settings

Supports:

No


Notes:

Recommend at least 0.20mm layer thickness. Print upright where the opening is point to the ceiling.

Post-Printing =============

clear out holes using burr remover or knife.

Category: 3D Printer Accessories

Tags